The E-Series K271 is an audiophile headphone cable specifically designed for the AKG 271 studio headphones. The K271 headphone cable is designed to maintain the tight punchy characteristics of the AKG 271 studio headphones and offer a higher level of performance with increased transparency, extended low frequencies, warmer mid-range and increased soundstage. The handmade E-Series K271 headphone cable aesthetically compliments the AKG headphones and offers superior durability over the stock cable.

The E-Series K271 has been tested and performs very well with the following headphones:
                              
                           K141 STUDIO       K171 STUDIO       K240 STUDIO
 

Why replace the stock cable? 

Because the stock section introduces considerable high frequency distortion due the length and the fact that the strains in the wire used are not isolation from each other.
When the strains in the wire are not isolated from each other, the signal jumps from strain to strain, causing distortion which increases with length.  In addition, the tight rubber dielectric which covers the cable also adds to this distortion when the high frequencies come in contact. Gauge and strain gauge variation are also factors.  The high gauge and  selected strand configuration used in the stock cable just does not transmit a balanced Endorphin of sound from a pre-amplifier.  The formula of strains used in the wire are not capable of capturing the true low frequencies, midrange and soundstage.
 

E-Series K271 cable characteristics:

                                       Naturally detailed high frequencies.

                                       Rich midrange presentation.

                                       Extended lower frequencies with added definition. 

                                       Expanded soundstage and musical presence.
                              

Construction: 4-conductor quad-braid field geometry cable consisting of linear induced  isolation constructed ultra pure copper enclosed with a Teflon/Oxygen dielectric finished in minimum absorption Techflex The E-Series headphone cable incorporates proprietary contact enhanced professional connectors with either 3.5-mm or ¼” configuration. The E-Series cable is assembled with a special handcrafted process which has been refined over many years to meet the state of the art audiophile standard.


                          
    To Order:

                            All 3.5-mm cables include a high quality 1/4" adapter

 

                                 4-ft   Length with  1/4"  connector :  $145.00
              
                                                        

                              4-ft   Length with  3.5-mm  connector :  $149.00
                        
                                                         
 

                                 6-ft   Length with  1/4"  connector :  $159.00
              
                                                        

                              6-ft   Length with  3.5-mm  connector :  $169.00
                        
                                                         
 

                               9-ft   Length with  1/4"  connector :  $189.00
              
                                                        

                             9-ft   Length with  3.5-mm  connector :  $199.00
                                   
                                                        
 

                               12-ft   Length with  1/4"  connector :  $219.00
              
                                                         

                            12-ft   Length with  3.5-mm  connector :  $229.00
                        
                                                        
 

                               15-ft   Length with  1/4"  connector :  $249.00
              
                                                        

                            15-ft   Length with  3.5-mm  connector :  $259.00
                        
                                                         
 

                               20-ft   Length with  1/4"  connector :  $289.00
              
                                                         

                            20-ft   Length with  3.5-mm  connector :  $299.00
                        
                                                        


         The E-Series K271 audiophile headphone cable is available in any length.
            Please send an email to stefanaudioart@yahoo.com for a same day
                                 quote on the length you are interested in.