Stefan AudioArt Home

	Stefan Professional Reference AudioArt Audiophile Headphone Cables
Home Dealer Order Page *Products* Custom Order Page User Comments Recommended Components 30-day performance Guarantee Ordering *Information* About Stefan AudioArt Dealers	E-Series Singled-ended K601 Audiophile Headphone Cable the E-Series K601 with an all black finish (black sheathing from the amplifier connector then black cable from the split to the headphone connection is specifically designed for the AKG K601 headphones. Stefan AudioArt audiophile headphone cable provide comprehensive sonic improvement and the new E-Series elevates the AKG K601's to true audiophile performance. With the E-Series installed, the K601 user will experience true open, organic and detailed sound. The E-Series K601 cable is a continuation of our unique approach to the performance enhancement of high end headphones through the thorough analysis of structural and electrical signal path properties. The Stock Cable Shortcomings: The AKG stock wiring design sends the right channel through the two plastic coated solid steel headband wires and then uses high gauge chassis wires to complete the path to the + and - driver posts. This degrades the right (and left) channel signal path and forces the right channel signal to travel about 22" further. As for the AKG stock cable itself, the high gauge wire and the thick rubber/plastic dielectric decreases the bass response, flattens the sound-stage and veils the audio Endorphin. The Solution: The new Stefan AudioArt E-Series K601 headphone cable is wired directly to the left and right AKG headphone drivers, thus eliminating the headband pass through. This allows the right and left channel signal paths to travel equal distance and removes a significant portion of the pollution. Specifically, the headband pass through contributes to a reduction in sound-stage and loss of definition and detail. Discover How Good the K601 Headphones Really Sound: The E-Series K601 cable formula uses a lower gauge wire and minimizes dielectric pollution. The new formula opens up the sound-stage, increases and adds weight and definition to the bass response and warms up the mid-range. The new formula also removes the veil from the entire audio Endorphin which is specifically noticeable in low frequency attack and the mid and upper treble range. E-Series K601 Picture Gallery Construction: 4-conductor quad-braid field geometry cable consisting of linear induced isolation constructed ultra pure copper enclosed with a Teflon/Oxygen dielectric finished in minimum absorption Techflex The E-Series headphone cable incorporates proprietary contact enhanced professional connectors with either 3.5-mm or ¼” configuration. The E-Series cable is assembled with a special handcrafted process which has been refined over many years to meet the state of the art audiophile standard. Requirements: Installation by the user or a professional is required. Installation: The E-Series K601 audiophile headphone will come completely assembled with special parts from AKG. The installation is rated easy to medium depending on your soldering skill level. Also included are step by step instruction for the disassemble and reassemble of the headphones, solder and heat sink for driver posts. The combination of the highest quality proprietary materials along with precision hand-craftsmanship, enables the E-Series cable to be the ultimate sonic improvement with unsurpassed flexibility for the AKG 601 headphones. Follow this link to read what users have to say about the E-Series cable. For approved professional installation of the Stefan AudioArt Hardwired K601 Audiophile Headphone cable please visit the following link: *Approved Professional* E-Series Cable Installation *Reviews* Read what the critics have to say about the E-Series cable Due to the current demand for the E-Series headphone cable there is a 3 - 5 DAY wait before ship time. To Order: All 3.5-mm cables include a high quality 1/4" adapter 20-ft (6.07 m) Length with 3.5-mm (mini) connector: $319.00 20-ft (6.07 m) Length with 1/4 inch (full size) connector: $309.00 15-ft (4.57 m) Length with 3.5-mm (mini) connector: $269.00 15-ft (4.57 m) Length with 1/4 inch (full size) connector: $259.00 12-ft (3.66 m) Length with 3.5-mm (mini) connector: $239.00 12-ft (3.66 m) Length with 1/4 inch (full size) connector: $229.00 10-ft (3.05 m) Length with 3.5-mm (mini) connector: $219.00 10-ft (3.05 m) Length with 1/4 inch (full size) connector: $209.00 9-ft (2.74 m) Length with 3.5-mm (mini) connector: $209.00 9-ft (2.74 m) Length with 1/4 (full size) inch connector: $199.00 8-ft (2.45 m) Length with 3.5-mm (mini) connector: $199.00 8-ft (2.45 m) Length with 1/4 inch (full size) connector: $189.00 7-ft (2.13 m) Length with 3.5-mm (mini) connector: $189.00 7-ft (2.13 m) Length with 1/4 inch (full size) connector: $179.00 6-ft (1.82 m) Length with 3.5-mm (mini) connector: $179.00 6-ft (1.82 m) Length with 1/4 inch (full size) connector: $169.00 5-ft (1.5 m) Length with 3.5-mm (mini) connector: $169.00 5-ft (1.5 m) Length with 1/4 inch (full size) connector: $159.00 4-ft (1.2 m) Length with 3.5-mm (mini) connector: $159.00 4-ft (1.2 m) Length with 1/4 inch (full size) connector: $149.00 3-ft (0.9 m) Length with 3.5-mm (mini) connector: $149.00 3-ft (0.9 m) Length with 1/4 inch (full size) connector: $139.00 The E-Series audiophile headphone cable is available in any length Please send an email to stefanaudioart@yahoo.com for a quote on the length you are interested in.